Used Machine

 Globales Netzwerk für gebrauchte Werkzeugmaschinen

 
Hauptseite
Gebrauchtmaschinen
Händler
+ Anzeige Schalten
Umformtechnik >  Blechbearbeitungsmaschinen >  Hydraulische Abkantpresse

CNC-Pressbrake - hydraulic

Anzeigedatum 24.03.2015
Fabrikat WEINBRENNER
Type GP 200/3050
Steuerungsart CNC /
Jahr 1991
Land Deutsch
Zusatzinformationen

pressure 200 t
chamfer lenght 3050 mm
distance between columns 2550 mm
column arm 300 mm
dayligth 540 mm
max. ram stroke 224 mm
feed down 180 mm/sec
feed up 90 mm/sec
pressing speed 9 mm/sec
main drive 15 kW
table width 250 mm
table height over floor 900 mm
back stop - adjustable 650 mm
with vertical adjustment 80 mm
weight of the machine ca. 13,9 t
dimensions of the machine ca. 3,75 x 2,05 x 2,95 m

* CNC-control CYBELEC DNC 30 for Y1, Y2, X and R axis
* back stop adjustment by ball screw spindles (X-axis)
* cam-stops on in double round guidings moving stop-fingers, so that the stop area is 400 mm larger than the measurement of the X-axis travel
- sheet bearings at stop fingers of back stop device are pneumatic retractable via
 CNC
* vertical adjustment of back stop via CNC (R-axis)
* hydraulic quick upper tool clamping
* hydraulic quick bottom tool clamping
* automatic crowning - controlled by CNC
* pneumatic die adjustment in 4 positions selectable by CNC
* cranked upper tools (die) - partetd edition
 1x20/1x40/1x50/1x60/1x70/1x80/1x175/1x200/7x300 mm
* lower tools (die plate) V 30 - parted edition
 1x40/3x50/1x60/1x70/1x80/2x100/2x200/1x250/6x300 mm
* 2 bearing arms in front, movable with roll guidings over whole table length
* two hand operating panel with foot switch
* trail path measurement

Machine in good condition, inspectable under power at our warehouse.

Kontaktinformationen

EKW Werkzeugmaschinen Aktiengesellschaft & Co. KG

Zeppelinstrasse 1 74219-Möckmühl-Züttlingen
Germany
EKW Werkzeugmaschinen Aktiengesellschaft & Co. KG
Andere Anzeigen der Händler
Tel 49   06298   92120
www.ekw-machines.de
Fordern Sie ein Angebot an.
Sind Sie sicher, dass Sie die Anzeige löschen möchten?


İptal
Alle Angebote/Anzeigen/Händlerprofil/Alle Bilder und Inhalte wurden durch die Benutzer veröffentlicht. UsedMachine.org übernimmt keine Haftung für den Inhalt der Webseite.
Hochladezeit der Seite 0,1249924 seconds