Year: 1983
Max. diameter of workpiece 14000 mm
Clamping diameter of rotary table 6300 mm
Max. load of table 250000 kg
Max. workpiece height 6300 mm
Ram travel (Z) mm
Ram size mm
Driven Tools NO
Tool magazine NO
The machine is in good technical condition, under power, after agreement it is possible to test it.
Slider stroke - cross slide - 3 200mm
- side slide - 2,000 mm
Slider tilting - cross slide ± 30
- side slide ± 15
Height of the lower surface of the normal knife holder above the clamping plate (crossbar in the last position)
- cross slide - 6 350 mm
- side slide - 5,350 mm
Cross member movement - 5,300 mm
Stand movement - 4 175 mm
Feed rate continuously available:
- working feeds - 0.2 - 200 mm.min -1
- rapid traverse - 200 - 2000mm.min -1
Rapid traverse of slides and sliders 1 200mm.min-1
Cross member adjustment speed 225mm.min-1
Gas speed variable (for both directions of rotation):
Turning: 1st stage 0.22 - 6 rpm
2nd stage 0.73 - 20rpm
Milling: 1st stage 0.001 - 0.3 rpm
2nd stage 0.003 - 1 rpm
Number of clamping jaws - 8
Number of extension arms - 8
Implemented repairs in 2015: - complete replacement of electrical installation
- Replacement of screw and nuts of feed and support
in 2018: - replacement of the table slide guide
- replacement of the bearings of the central table bearing + scraping and adjustment of the table bearing