Vertical Gear Hobbers

Manufacturer PFAUTERModel P1251Condition UsedW/center support 49.25" (1251MM)Wo/center support 60.00" (1524MM)Maximum axial travel 39.37" (1000MM)Maximum dp / module in steel 1.6 DP (15.87 MOD)Min # of teeth (single-start index drive) 20 TEETHWorkpiece & hob, minimum 2.36" (60MM)Workpiece & hob, maximum 31.5" (800MM)Maximum hob diameter 10" (254MM)Maximum hob length 11" (280MM)Maximum hob travel 9.85" (250MM)Diameter of hob arbors 1",1.25",1.5",2"Taper for hob arbors MORSE # 5Diameter of work table 47.24", (1200MM)Table weight capacity 11,000 LBS (5,000KG)Diameter of work table bore 12" (305MM)Work arbor diameter 2.5" (63.5MM)- hob speeds 30 - 180 RPM- axial feed (0.5 - 6.000MM/PR)- radial feed (0.170 - 2.000MM/PR)- tangential feed (0.200 - 2.500MM/PR)Total connected electrical load (approx.) 32 KVAMachine overall length 291.80",(7412MM)Machine overall width 169.80",(4313MM)Macine overall height 137.75",(3500MM)Machine overall weight (approx.) 50,700LBS(23,000KG)

Max. Wheel Diameter 1800mmGear width 550mmMaximum Module 16Minimum Module 1Min Number of teeth 12 TEETHMilling Cutter Dia. x width 210 x 260mmHob Abor Diameter 32-40-50mmShifting 150mmTable Diameter 970mmTable bore 160mmHob Speed 30-120rpmDimensions 3.9 x 2.1 x 2.88mTotal Power Requirement 14kWMachine overall weight (approx.) 11.5T

Table Size..................................700mmTable Bore Size............................200mmMaximum Gear O/D without steady....800mmMaximum Gear O/D with steady.........500mmMaximum Module 10. But possible to cut up to 16 ModMaximum Hob O/D.............................195mmMaximum Hob Length...........................220mmMaximum Vertical Travel of Hob...............410mmMaximum Tangential (Hob Shift)................150mmAuto Cycle, Diagonal, Tangential & Differential Hobbing MethodMachine complete with set of Change Gears and accessories

Max. gear Ø with counter bracket 800mmMax. gear Ø without counter bracket 1,250 / 1,500mmModule range, min./max. 2 / 22Module, using single indexing device 20Hobbing width 600mmMax. length of workpiece 1,000mmNo. of teeth, approx. 12 – 600Table Ø x bore 1,020 x 250mmHobbing slide swivelling 200 / 45°Hob size, Ø x length 240 x 280mmHob shifting, max. 200mm10 hob-spindle speeds 28 – 200rpmFeed range, axial 0.2 – 8mm/revFeed range, radial 0.1 – 2 mm/revFeed range, tangential 0.1 – 2 mm/revHob-spindle drive, approx. 12.5 kWTotal electrical load, approx. 25 kW - 380 V - 50 HzWeight, approx. 15,000kgFull Set of Change Gears and Accessories.Machine in Very Good Working Condition

Country of origin:..........SwedenTable size:...................720mmMaximum gear o/d..........1200mmMinimum gear o/d...........40mmVertical Travel of Cutter Head......700mmMaximum module for spur & helical.......15 mod(6) Cutter Spindle Speeds.....23-128RPM7.5H Motor, 220/3/60Rapid feedsFull set of Change Gears, work arbor & AccessoriesHandbook Manual

Machine Make : PfauterMachine Model : RS2VCountry of Origin: GermanyTable Diameter: 700 mmMax Gear Diameter: 600 mmMax Gear Diameter without Tail Stock: 1000 mmMax Module: 10 ModuleMax Hob Diameter: 200 mmTable Bore Size 5"Milling Cutter Speeds: 200 RPMTotal Power: 7.8 KWMachine Equipped with Full Set of Change Gears, Works Arbors & Accessories, Handbook ManualExcellent Condition

Max. Workpiece Diameter with Supporting Column: 15¾”Max. Travel of Hob Slide (Max. Width of Gear): 14 11/16”Max. Pitch for Heavy Duty Hobbing: 4.23 DPMax. Pitch for Normal Duty Hobbing: 3.175 DPTaper of Hob Spindle: Morse Taper No. 5Hob Arbor with Hob Mounting Service: 1¼”Max. Diameter of Hob: 7¼”Max. Length of Hob: 6¾”Max. Shifting Way of Hob: 4¾”Hob Speed: Infinitely Variable from 40-220 RPMFeeds Infinitely Variable:- Vertical: 0.01” - 0.18”- Horizontal: 0.005” - 0.09”- Tangential: 0.004” - 0.07”Max. Diameter of Work Table without Coolant Oil Groove: 21 5/8”Table Bore: 3 15/16”Mounting Arbor Taper: 5Diameter of Mounting Arbor: 1½”Height of Workpiece Support:- Climb Hobbing: 9 27/32”- Conventional Hobbing: 8¼”Max. Length of Workpiece to be Inserted into Table Bore: 26½”Max. Diameter of Workpiece to be Inserted into Table Bore: 3 1/16”Min. Center Distance between Hob Arbor and Mounting Arbor: 1 3/16”Max. Center Distance between Hob Arbor and Mounting Arbor: 13”Capacity of Main Motor: 1

stock no. :23031Machine's group :Wire cutting machineType :CHARMILLES ROBOFIL 440 CCController :CHARMILLESTeknik Detay

stock no. :23016Machine's group :CNC Gear Hobbing MachinesType :PFAUTER-MIKRON A 15 CNCController :SIEMENS 840CTeknik Detaylar

Gear hobbing and worm milling machine stock no. :22741Machine's group :Worm gear cutting machineType :MONNIER + ZAHNER MZ 120Controller :GE FANUC Series 18i-MTeknik Detay Link