Tisch-Bohrwerke

Diameter of working spindle 100 mm Travel X-axis 1600 mm Travel Y-axis 1120 mm Spindle speed 0 - 1200 /min. Cooling through spindle NO Spindle travel - W axis 900 mm Travel Z-axis 1250 mm Tool magazine NO Spindle taper SK 50 . The machine is in very good condition, after part-overhaul. More information on request.

Year: 1997 Control system Heidenhain TNC 426 Diameter of working spindle 130 mm Travel X-axis 3500 mm Travel Y-axis 2000 mm Spindle speed 0 - 1500 /min. Cooling through spindle NO Spindle travel - W axis 800 mm Travel Z-axis 1250 mm Tool magazine YES Number of positions in magazine 60 Spindle taper ISO 50 . Clamping area of table 1800 x 1600 mm Machine weight 35000 kg Main motor power 34 kW Max. load of table 12000 kg Machine under the power. Handwheel. Tool holders. Spindle support. Machine was running only for one shift!

Diameter of working spindle 100 mm Travel X-axis 1600 mm Travel Y-axis 1120 mm Spindle speed 7 - 1120 /min. Cooling through spindle NO Spindle travel - W axis 900 mm Travel Z-axis 1250 mm Tool magazine NO Spindle taper ISO 50 . Max. load of table 3000 kg Machine dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14000 kg Main motor power 11 kW Total input 17 kVA Clamping area of table 1250 x 1250 mm Face plate diameter 600 mm Max. diameter of face turning 900 mm Machine is overhauled. Hand-controlling horizontal borer machine with fixed stand and cross-adjustable table. The machine is in the following version: X, Z, Y ground, traverse milled and undercut, more precisely glued with special material with sliding properties (Turcite, GS-super fluid, etc.), wedges ground and scraped. The worktable surface is grinded and scraped (reinovation of grooves as required). The X and Y axes are equipped with trapezoidal screws with nuts - placed in bearing housings. Headstock - Gearwheel be

Year: 1981 Diameter of working spindle 90 mm Travel X-axis 1250 mm Travel Y-axis 900 mm Spindle speed 0 - 1120 /min. Cooling through spindle NO Spindle travel - W axis 680 mm Travel Z-axis 1000 mm Tool magazine NO Spindle taper ISO 40 . Max. load of table 3000 kg Rapid feed XYZ 18 – 900 / 3.200 m/min Clamping area of rotary table 1000 x 1120 mm Machine weight 10 000 kg Space of machine 5000 x 2500 x 2800 mm The machine is in good technical condition, under power, after agreement is possible to test it.

Year: 1975 Diameter of working spindle 90 mm Travel X-axis 1000 mm Travel Y-axis 900 mm Spindle speed 0 - 1400 /min. Cooling through spindle NO Spindle travel - W axis 710 mm Travel Z-axis 800 mm Tool magazine NO Spindle taper MORSE 5 . Main motor power 7,5 kW Table dimensions 1000 x 1120 mm Machine dimensions l x w x h 3900 x 2500 x 2650 mm Machine weight 9000 kg The machine is in good technical condition, under power, after agreement is possible to test it.

Year: 2007 Control system Heidenhain TNC 530 Diameter of working spindle 110 mm Travel X-axis 2500 mm Travel Y-axis 1500 mm Spindle speed 0 - 2500 /min. Cooling through spindle YES Pressure of cooling 20 bar Spindle travel - W axis 550 mm Travel Z-axis 1200 mm Tool magazine NO Spindle taper ISO 50 . Table dimensions 1250x1400 mm Max. load of table 5000 kg Max. torque of spindle 1300 Nm Machine dimensions l x w x h 5663 x 4775 x 4078 mm Machine weight 22000 kg The machine is in good technical condition, under power, after agreement is possible to test it.

Year: 1992 Diameter of working spindle 100 mm Travel X-axis 1500 mm Travel Y-axis 1250 mm Spindle speed 7 - 1120 /min. Cooling through spindle NO Spindle travel - W axis mm Travel Z-axis 1800 mm Tool magazine NO Spindle taper ISO 50 . Clamping area of rotary table 1200x1200 mm

Catalog No. : 8208Type: W 200Producer: ŠKODAMade in: 1973Characteristic: Maximum rotary speed of the spindle: 3000 1/min X-Axis travels: 4000 mm Y-Axis travels: 3150 mm Z-Axis travels: 2000 mm W-Axis travels: 1600 mm Spindle diameter: 200 mm

Catalog No. :7577Type:W 160 HProducer:ŠKODAMade in:1982 GO 2009Characteristic: Control system: Heidenhain iTNC 530 Length of the working table: 9000 mm Width of the working table: 4000 mm X-Axis travels: 9000 mm Y-Axis travels: 3500 mm Z-Axis travels: 1500 mm Spindle diameter: 160 mm

Catalog No. : 7260Type: WHN 13.4 AProducer: TOSMade in: 1986, GO 2003Characteristic: Control system: MEFI CNC 859 Length of the working table: 1800 mm Width of the working table: 1600 mm Maximum table load (evenly distributed): 12 t Maximum rotary speed of the spindle: 1098 1/min X-Axis travels: 3000 mm Y-Axis travels: 2000 mm Z-Axis travels: 800 mm W-Axis travels: 1250 mm Spindle diameter: 130 mm Taper: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t